How much peel away do I need?

Apply Peel Away paste 3 – 4mm thick, covering the surface evenly. If paint is very thick, or if there are many layers, then Peel Away may need to be applied up to 6mm thick. Completely cover the paste with the printed Peel Away laminated paper sheet and smooth out any air bubbles.

What’s the difference between Peelaway 1 and 7?

What is the difference between Peelaway 1 and Peelaway 7? The greatest difference in performance will be seen on very old paint systems. … This will allow the modern paints to be removed with Peelaway 7, followed by Peelaway 1 to remove the older paint.

How long does Peel Away 7 take to work?

Apply Peelaway® poultice blanket over paste with printed side face out, rubbing gently to ensure good adhesion to the paste, pierce any air bubbles. Dwell time will be as determined by the test patch, between 1 and up to 48 hours depending on paint types, thickness and temperature.

How much Peelaway do I need?

You can apply Peelaway® with a spatula, trowel or brush; you can also spray it on for bigger surface areas. As a guide coverage is approximately 1m2 per kilo at 1mm thick for P7. For P1 the coverage is reduced by approximately 20 per cent.

INTERESTING:  Should you double cleanse to remove sunscreen?

Can you use cling film with Peelaway?

Answer: Cling film works pretty well with peel away 1.

How long do you leave Peel Away 1 on?

On average 72 hours minimum. Depending on the surface, number of layers and age of coatings you may be required to leave Peel Away on longer on old buildings, 5-7 days in some cases.

Is Peel away any good?

5.0 out of 5 starsExcellent paint stripper – worth the money! Stripped about 20 odd layers of paint off 2 cast iron fireplaces with this. I think I slopped this on quite thick, so I needed about 1 and 1/4 tubs in total, but I am sure I could have done it with just one 5kg tub if I had been more economical with it!

How do you use peel away 8?

Apply Peel Away® 2mm thick, cover with laminated paper and seal the edges with masking tape. Dwell time should be between 8 to 24 hours only. Remove carefully and wash down the surface.

What is the best paint stripper Australia?

Paint stripper for metal Australia – Product list

Paint stripper for metal type/application Based on
Diggers Paint Stripper Plus Gel/brush or roller Ethylene Glycol; biodegradable (methylene chloride free)
Polystrippa Advanced Paint & Varnish Stripper Gel/brush Dimethyl Sulfoxide (without MC, NMP)

Will a heat gun remove paint from brick?

Pro Tip: if you can see the exposed brick in these areas, then you might be able to use a heat gun to remove the paint. Not only are heat guns a more economical solution, but it’ll also be less messy.

INTERESTING:  Why am I getting pimples after 40?

Is peel away safe?

Unlike other popular paint removers, Peel Away® 1 does not contain the dangerous chemicals methylene chloride or NMP, making it a much safer alternative for homeowners and professionals. This product is zero VOC, water-based, non-flammable, and biodegradable.

How do you remove paint from bricks from Bunnings?

1Stripping paint with a heat gun

Move the heat gun slowly in an up-and-down motion. Don’t go too close to your surface, or you may burn the timber. As the paint starts to bubble, scrape it off with the scraper. Use some sandpaper to clean up the job and it’s ready to re-paint.