How do you apply peel away?
Apply Peel Away paste 3 – 4mm thick, covering the surface evenly. If paint is very thick, or if there are many layers, then Peel Away may need to be applied up to 6mm thick. Completely cover the paste with the printed Peel Away laminated paper sheet and smooth out any air bubbles. ONLY use Peel Away paper sheets.
How long do you leave Peel Away 1 on for?
Rub gently to remove air, pierce bubbles where necessary. Allow to stand from 2 to 48 hours, again this will be determined by the paint/coating type and thickness/number of layers.
Does peel away paint remover work?
Then I remembered that the instructions suggested washing the wood after removing the stripper. I filled a bucket with warm water, slipped on some rubber gloves and used a rag to wash the wood. … Verdict: Peel away works really well on wood surfaces. It cleared away multiple layers of paint without damaging the wood.
How do you apply Peel Away 7?
Apply Peelaway® poultice blanket over paste with printed side face out, rubbing gently to ensure good adhesion to the paste, pierce any air bubbles. Dwell time will be as determined by the test patch, between 1 and up to 48 hours depending on paint types, thickness and temperature.
What is the difference between Peel Away 1 and 7?
What is the difference between Peelaway 1 and Peelaway 7? The greatest difference in performance will be seen on very old paint systems. … This will allow the modern paints to be removed with Peelaway 7, followed by Peelaway 1 to remove the older paint.
How do you get rid of dry peel away 1?
Removal & Clean Up: Remove by inserting a trowel, spatula, or other paint scrapping tool underneath paste and lift Dumond® Laminated Paper while slowly scrapping. Plastic tools are recommended when working on wood substrates.
Does Peel Away 7 work?
Sometimes both Peelaway products will work equally well. In this case, we would recommend using Peelaway 7 as it does not require a neutralisation process. … This will allow the modern paints to be removed with Peelaway 7, followed by Peelaway 1 to remove the older paint.
Is peel away safe?
Unlike other popular paint removers, Peel Away® 1 does not contain the dangerous chemicals methylene chloride or NMP, making it a much safer alternative for homeowners and professionals. This product is zero VOC, water-based, non-flammable, and biodegradable.
How do you use peel away 8?
Apply Peel Away® 2mm thick, cover with laminated paper and seal the edges with masking tape. Dwell time should be between 8 to 24 hours only. Remove carefully and wash down the surface.
How do you handle multiple layers in paint?
Slowly peel the paper of the wood while you are using a broad knife or wide putty knife to release the multiple layers of paint. Done correctly most of the paint and stripper will be attached to the release paper. Then let the residue dry out and dispose of it.